Table 4-4 Tray 3 specifications
Media type Dimensions
1
Weight Capacity
2
Paper Minimum: 148 x 210 mm
(5.83 x 8.27 inches)
Maximum: 297 x 432 mm
(11.7 x 17 inches)
60 to 120 g/m
2
(16 to 32 lb)
Up to 250 sheets
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on the media weight and thickness, and environmental conditions.
Table 4-5 Optional trays 4, 5, and 6 specifications
Media type Dimensions
1
Weight Capacity
2
Paper Minimum: 148 x 210 mm
(5.83 x 8.27 inches)
Maximum: 297 x 432 mm
(11.7 x 17 inches)
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on the media weight and thickness, and environmental conditions.
Table 4-6 Specifications for automatic 2-sided printing
Trays Dimensions
1
Weight Capacity
2
Tray 1 Minimum: 148 x 210 mm
(5.83 x 8.27 inches)
Maximum: 297 x 432 mm
(11.7 x 17 inches)
60 to 120 g/m
2
(16 to 32 lb)
Up to 100 sheets
Tray 2 Minimum: 148 x 210 mm
(5.83 x 8.27 inches)
Maximum: 297 x 364 mm
(11.7 x 14.33 inches)
60 to 120 g/m
2
(16 to 32 lb)
Up to 250 sheets
Tray 3 and optional trays 4, 5,
and 6
Minimum: 148 x 210 mm
(5.83 x 8.27 inches)
Maximum: 297 x 432 mm
(11.7 x 17 inches)
60 to 120 g/m
2
(16 to 32 lb)
Tray 3: up to 250 sheets
Optional trays 4, 5, and 6: up to
500 sheets
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on the media weight and thickness, and environmental conditions.
Table 4-7 Specifications for automatic stapling and stacking
Operation Dimensions
1
Weight Output-bin capacity
2
Automatic stapling Standard sizes supported:
●
A4 (297 x 210 mm; 11.7 x 8.27 inch)
●
Letter (279 x 216 mm; 11 x 8.5 inch)
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
70 Chapter 4 Media and trays ENWW
To Next Page
Loading...