Operation Dimensions
1
Weight Output-bin capacity
2
NOTE Automatic stapling is not supported
for rotated A4- or letter-size media.
Automatic stacking Standard sizes supported:
●
A4 (297 x 210 mm; 11.7 x 8.27 inch)
●
Letter (279 x 216 mm; 11 x 8.5 inch)
●
B4-JIS (257 x 364 mm; 10.1 x 14.33 inch)
●
B5-JIS (257 x 182 mm; 10.1 x 7.2 inch)
●
Legal (216 x 356 mm; 8.5 x 14 inch)
●
Executive (267 x 184 mm; 10.5 x 7.25 inch)
●
A5 (210 x 148 mm; 8.27 x 5.83 inch)
●
Executive JIS (216 x 330 mm; 8.5 x 13 inch)
●
A3 (297 x 420 mm; 11.69 x 16.54 inch)
●
Ledger (279 x 432 mm; 11 x 17 inch)
NOTE Automatic stacking is not supported
for rotated A4- or letter-size media.
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on the media weight and thickness, and environmental conditions.
Table 4-8 Specifications for the automatic document feeder (ADF)
Media type Dimensions
1
Weight Capacity
2
Paper Minimum: 138 x 210 mm (5.43 x 8.27 inches)
Maximum: 279 x 432 mm (11 x 17 inches)
60 to 120 g/m
2
(16 to 32 lb)
Up to 50 pages
NOTE The
automatic stapler
can staple up to
30 sheets.
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on the media weight and thickness, and environmental conditions.
Table 4-7 Specifications for automatic stapling and stacking (continued)
ENWW Select print media 71
To Next Page
Loading...