5. Remove one screw (callout 1), and then remove the cover (callout 2).
Figure 1-131 Remove the right-door assembly (5 of 8)
1
2
6. Disconnect two connectors (callout 1), and then release the wire harness from the guide
(callout 2).
TIP: It is easier to disconnect the lower connector if you first remove the wire harnesses from the
guide.
Figure 1-132 Remove the right-door assembly (6 of 8)
1
2
88 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...