4. Pull down on the cover to release three tabs (callout 3).
TIP: It might be easier if you position the product at the edge of the work surface so that there is
a space for the cover to slide downward. Or, you might try inserting a small flat blade screwdriver
behind the cover, and carefully pry the cover away from the product as you pull down on the
cover to release the tabs.
Figure 1-152 Remove the right-front cover (4 of 5)
3
5. Rotate the bottom of the cover away from the product, and then pull down on the cover to remove
it.
Figure 1-153 Remove the right-front cover (5 of 5)
102 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...