5. Remove two screws (callout 1). Use your finger to release the locking tab (callout 2), and then
remove the cover.
CAUTION: Be careful. The PGC actuators are easily dislodged when the cover is removed. See
Figure 1-320 Reinstall the PGC actuators (1 of 5) on page 218. To reinstall the actuators, see
Reinstall the protective glass cleaner (PGC) actuators on page 218.
Figure 1-317 Remove the laser/scanner assembly (C/Bk) (5 of 7)
1
2
216 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...