Front-door assembly
1. Open the front door.
Figure 1-43 Remove the front-door assembly (1 of 2)
2. Remove two screws (callout 1), and then remove the front-door assembly.
NOTE: A small sheet-metal bracket on the left side of the door is not captive. Do not lose the
bracket when you remove the screw.
Figure 1-44 Remove the front-door assembly (2 of 2)
1
3. If you are installing a replacement front-door assembly, install the HP name tag and the
appropriate product model number tag on the assembly.
ENWW
Removal and replacement procedures
37
To Next Page
Loading...