Embedded Web server (HP LaserJet P1500 network models
only)
Use the embedded Web server (EWS) to view device and network status and to manage printing
functions from your computer.
●
View device status information
●
Determine the remaining life on all supplies and order new ones
●
View and change the device default configuration settings
●
View and change network configuration
You do not need to install any software on the computer. You only need to use one of these supported
Web browsers:
●
Internet Explorer 6.0 (and later)
●
Netscape Navigator 7.0 (and later)
●
Firefox 1.0 (and later)
●
Mozilla 1.6 (and later)
●
Opera 7.0 (and later)
●
Safari 1.2 (and later)
●
Konqueror 3.2 (and later)
The embedded Web server works when the device is connected to a TCP/IP-based network. The
embedded Web server does not support IPX-based connections or direct USB connections.
NOTE: You do not have to have Internet access to open and use the embedded Web server. However,
if you click a link on any of the pages, you must have Internet access in order to go to the site associated
with the link.
Open the embedded Web server
To open the embedded Web server, type the IP address or hostname of the device in the address field
of a supported Web browser. To find the IP address, print a Configuration page at the device by pressing
the Go button when the Ready light is on and no other jobs are printing.
TIP: After you open the URL, bookmark it so that you can return to it quickly in the future.
The embedded Web server has three tabs that contain settings and information about the device: the
Information tab, the Settings tab, and the Networking tab.
Information tab
The Information pages group consists of the following pages:
●
Device Status displays the status of the device and HP supplies.
●
Device Configuration shows the information found on the Configuration page.
ENWW Embedded Web server (HP LaserJet P1500 network models only) 9
To Next Page
Loading...
