Manual
Before you can use the manual duplexing feature, you must select the Allow Manual Duplexing
check box on the Device Settings tab of the printer properties dialog box. See
Change printer-driver
settings for Windows on page 13.
1. Load paper face-down in the priority input slot or in the main-input tray.
2. Open the printer driver, and then click the Finishing tab.
3. Click the Print on both sides (manually) check box. If you will bind the document along the
top edge, click the Flip pages up check box.
4. Click the OK button to print the first side of the job.
48 Chapter 6 Print tasks ENWW
To Next Page
Loading...