Print information pages
Information pages reside within the product memory. These pages help diagnose and solve problems
with the product.
NOTE: If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System Setup menu on the control panel or the embedded Web server.
1. At the control panel, press the OK button to open the menus.
2. Open the Reports menu.
3. Select the report you want to print, and then press the OK button to print the report.
Menu item Description
Menu Structure Prints a map of the control panel-menu layout. The active settings for each menu are
listed.
Config Report Prints a list of all the product settings. Includes network information when the product is
connected to a network.
Supplies Status Prints the status for each print cartridge, including the following information:
● Estimated percentage of cartridge life remaining
●
Approximate pages remaining
●
Part numbers for HP print cartridges
● Number of pages printed
●
Information about ordering new HP print cartridges and recycling used HP print
cartridges
Network Summary Prints a list of all product network settings
Usage Page Prints a page that lists PCL pages, PCL 6 pages, PS pages, pages that were jammed or
mispicked in the product, monochrome (black and white) or color pages; and reports the
page count
PCL Font List Prints a list of all the PCL fonts that are installed.
PS Font List Prints a list of all the PostScript (PS) fonts that are installed
PCL6 Font List Prints a list of all the PCL6 fonts that are installed
Color Usage Log Prints a report that shows the user name, application name, and color usage information
on a job-by-job basis
Service Page Prints the service report
Diagnostics Page Prints the calibration and color diagnostics pages
Print Quality Page Prints a page that helps solve problems with print quality
122 Chapter 10 Manage and maintain ENWW
To Next Page
Loading...
