4. Disconnect one connector (callout 1), and then remove six screws (callout 2).
Figure 1-119 Remove the high-voltage power-supply PCA (4 of 5)
1
2
5. Release ten tabs (callout 1), and then remove the high-voltage power-supply PCA.
Figure 1-120 Remove the high-voltage power-supply PCA (5 of 5)
1
ENWW
Removal and replacement procedures
83
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...