4. Release two tabs, and then rotate the roller away from the product to remove it.
Figure 1-13 Remove the Tray 1 paper-pickup roller (3 of 3)
5. Release the retainer tabs, and then remove the separation pad from the base.
CAUTION: The Tray 1 separation-pad spring is not captive. Do not lose the spring when the
separation pad is removed.
Figure 1-14 Remove the Tray 1 separation pad
ENWW
Removal and replacement procedures
17
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...