Reinstall the left cover
1. When you reinstall the left cover, ensure that the slot in the cover (callout 1) aligns with the tab
(callout 2) on the product.
Figure 1-63 Reinstall the left cover (1 of 2)
1
2
2. When you reinstall the left cover, ensure that the pin on the cover (callout 1) aligns with the slot
(callout 2) in the product.
Figure 1-64 Reinstall the left cover (2 of 2)
3
4
46 Chapter 1 Removal and replacement ENWW
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...