4. Remove two screws (callout 1).
Figure 1-30 Remove the cartridge door assembly and front cover (2 of 4)
1
5. Pull the bottom of the assembly up in order to release two hooked tabs (callout 1), and then pull
the assembly away from the product.
Figure 1-31 Remove the cartridge door assembly and front cover (3 of 4)
1
ENWW
Removal and replacement procedures
23
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...