HP laserjet pro 400 mfp - Page 43

3. On the left side of the product, release one tab (callout 1), and then remove the gear.
Figure 1-35 Remove the registration assembly (1 of 3)
1
4. Inside the product chassis, on the formatter side, release two tabs (callout 1), and then lift up on
the guide (callout 2) to release it and remove it from the product.
Figure 1-36 Remove the registration assembly (2 of 3)
2
1
ENWW
Removal and replacement procedures
27
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com