4. Release the cables (callout 1) from the cable guides (callout 2), remove one screw (callout 3), and
then remove the cable guide (callout 4).
Figure 1-51 Remove the main motor (2 of 4)
3 4 1
2
5. Remove one screw (callout 1), remove the duct (callout 2), and then disconnect one connector
(callout 3).
Figure 1-52 Remove the main motor (3 of 4)
1
2
3
38 Chapter 1 Removal and replacement ENWW
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...