HP laserjet pro 400 mfp - Universal serial bus (USB) PCA

10. Pull the cable (callout 1) and the flat cable (callout 2) into the product chassis, and then carefully
slide the engine controller assembly (callout 3) out of the product.
Figure 1-65 Remove the engine controller assembly (9 of 9)
2
1
3
Universal serial bus (USB) PCA
NOTE: This section applies to walkup USB-equipped models only.
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
46 Chapter 1 Removal and replacement ENWW
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com