HP laserjet pro 400 mfp - Fax PCA

2. On the left side of the product, pull the lower left-hand corner of the PCA (callout 1) to disconnect
the connector on the back of the PCA, and then pull the PCA away from the product.
Figure 1-69 Remove the wireless PCA
1
Fax PCA
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
2. Disconnect one flat flexible cable (callout 1) from the fax PCA, and then remove four screws
(callout 2) to remove the PCA from the product.
Figure 1-70 Remove the fax PCA
1
2
ENWW
Removal and replacement procedures
49
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com