HP laserjet pro 400 mfp - Connecting PCA

3. Release two tabs (callout 1) to remove the PCA shield.
Figure 1-72 Remove the power-switch PCA (2 of 3)
1
4. Release one tab (callout 1), and then pull the PCA out of the front cover.
Figure 1-73 Remove the power-switch PCA (3 of 3)
1
Connecting PCA
The connecting PCA is located on the product right side, below the control panel.
1. Remove the following components:
●
Tray 2 cassette
●
Left cover. See
Left cover on page 13.
ENWW
Removal and replacement procedures
51
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com