2. On the right side of the unit, remove one screw (callout 1), release one tab (callout 2) from the
driver PCA cover (callout 3), and then slide the PCA cover to the right to remove it.
Figure 1-82 Remove the optional paper feeder paper sensor PCA (1 of 3)
1
2
3
3. On the driver PCA, disconnect one connector (callout 1).
Figure 1-83 Remove the optional paper feeder paper sensor PCA (2 of 4)
1
58 Chapter 1 Removal and replacement ENWW
For more information and parts on the HP LaserJet Pro 400, M425 call 800-551-1943 or order on line at www.printersupplies.com
To Next Page
Loading...