Tray 2
●
Tray capacity and paper orientation
●
Load Tray 2
Tray capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/
narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 2-4 Tray 2 capacity
Paper type Specifications Quantity
Paper Range:
60 g/m
2
(16 lb) to 220 g/m
2
(58 lb)
Equivalent to 250 sheets of 75 g/m
2
(20 lb)
Maximum stack height: 25 mm (.98 in)
For A5, A6, and 4x6 paper sizes, and for paper printed in
a landscape orientation the maximum stack height is 15
mm (.59 in),
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 25 mm (.98 in)
Glossy paper Range:
105 g/m
2
(28 lb) to 220 g/m
2
(58 lb)
100 sheets
Table 2-5 Tray 2 paper orientation
Paper type Image orientation Duplex mode How to load paper
Preprinted or letterhead Portrait 1-sided printing Face-up
Top edge at the right side of the tray
2-sided printing Face-down
Top edge at the left side of the tray
ENWW Tray 2 23
To Next Page
Loading...