Connect to a network (network models only)
The product can connect to wired or wireless networks.
NOTE: You cannot connect to a wired and wireless network simultaneously. Wired connections take
precedence.
Supported network protocols
To connect a networking-equipped product to a network, you need a network that uses one of the
following protocols.
●
TCP/IP (IPv4 or IPv6)
●
Port 9100
●
LPR
●
DHCP
●
AutoIP
●
SNMP
●
Bonjour
●
SLP
●
WSD
●
NBNS
Install the product on a wired network
You can install the product on a network by using the HP Smart Install or from the product CD.
ENWW
Connect to a network (network models only)
27
To Next Page
Loading...