Remove the fuser delivery assembly
CAUTION: ESD sensitive.
1. Release one tab (callout 1) and disconnect one connector (callout 2) on the back of the wireless
PCA.
Figure 1-40 Remove the fuser delivery assembly (1 of 6)
1
2
2. Remove three screws (callout 1).
3. Disconnect three connectors (callout 2) and the formatter (callout 3).
Figure 1-41 Remove the fuser delivery assembly (2 of 6)
2
3
1
ENWW
Removal and replacement procedures
39
To Next Page
Loading...
