Menu item Sub-menu item Sub-menu item Description
User-Defined Low Black Type the percentage of estimated life
remaining at which the product alerts
you that the print cartridge is low.
Cyan
Magenta
Yellow
Courier font Regular
Dark
Selects a version of the Courier font.
The default is Regular.
Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect
print output. Items that have asterisks (*) indicate the factory default setting.
Menu item Sub-menu item Description
Cleaning Page Use this option to clean the product if you see
toner specks or other marks on the printed
output. The cleaning process removes dust and
excess toner from the paper path.
When you select this item, the product prompts
you to load plain paper in Tray 1 and then press
the OK button to start the cleaning process.
Wait until the process is complete. Discard the
page that prints.
USB Speed High*
Full
Sets the USB speed to High or Full. For the
product to actually operate at high speed, it
must have high speed enabled and be
connected to an EHCI host controller that is
also operating at high speed. This menu item
also does not reflect the current operating
speed of the product.
Less paper curl On
Off*
If printed pages are consistently curled, use this
option to set the product to a mode that
reduces curl.
Archive print On
Off*
If you are printing pages that will be stored for a
long time, use this option to set the product to a
mode that reduces toner smearing and dusting.
Firmware Date Displays the current firmware datecode.
Restore defaults Sets all customized copy settings to the factory
default values.
82 Chapter 2 Solve problems ENWW
To Next Page
Loading...