1 2
1 2-line control panel
2 Touchscreen control panel
2-line control panels
1. On the printer control panel, press the Setup
button.
2. Select Fax Setup.
3. Select Send Fax Setup, and then select Def. Resolution.
4. Select the desired resolution setting, and then press OK.
Touchscreen control panels
1. From the Home screen on the printer control panel, touch the Setup
button.
2. Select Fax Setup.
3. Select Advanced Setup, and then select Fax Resolution.
4. Select the desired resolution setting, and then touch OK.
Check the error-correction settings
Usually, the printer monitors the signals on the telephone line while it is sending or receiving a fax. If the
printer detects an error during the transmission and the error-correction setting is On, the printer can request
that the portion of the fax be resent. The factory-set default for error correction is On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you are
willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to
send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.
NOTE: The steps vary according to the type of control panel.
1 2
ENWW Improve fax image quality 169
To Next Page
Loading...