Load the input tray
Introduction
The following information describes how to load paper in the input tray. This tray holds up to 150 sheets of
75 g/m
2
(20 lb) paper.
Load paper into the input tray
NOTE: When you add new paper, make sure that you remove all of the paper from the input tray and
straighten the stack. Do not fan the paper. This reduces jams by preventing multiple sheets of paper from
feeding through the product at one time.
1. If it is not already open, open the input tray.
2. Adjust the paper width and length guides
outward.
18 Chapter 2 Paper trays ENWW
To Next Page
Loading...