HP LaserJet Pro M25 - Make a copy

Make a copy
NOTE: The steps vary according to the type of control panel.
1 2
1 LED control panel
2 LCD control panel
LED control panels
1. Load the document on the scanner glass according to the indicators on the product.
2. Close the scanner.
3.
At the product control panel, press the Setup
button, and make sure that the Number of Copies
light is on.
4. Press the arrow buttons to adjust the number of copies.
5.
Press the Start Copy
button to start copying.
LCD control panels
1. Load the document on the scanner glass according to the indicators on the product.
2. Close the scanner.
3.
At the product control panel, press the Number of Copies
button.
4. Select the number of copies.
5.
Press the Start Copy
button to start copying.
44 Chapter 5 Copy ENWW