HP LaserJet Pro M402d - Page 188

Manually update the rmware
Manually update the rmware (LCD control panel)
1. On the product control panel, press the OK button to open the menus.
2. Open the following menus:
●
Service
●
LaserJet Update
●
Check For Updates Now
3. Select the Yes option, and then press the OK button to prompt the product to search for rmware
updates. If the product detects an upgrade, it will begin the update process.
NOTE: The LaserJet Update menu also contains items that allow you to set up automatic rmware updates
for the product, allow you to upload an earlier rmware version, and enable or disable a prompt prior to a
rmware le upload.
Manually update the rmware (touchscreen control panel)
1.
From the Home screen on the product control panel, touch the Setup button.
2. Open the following menus:
●
Service
●
LaserJet Update
●
Check For Updates Now
3. Touch the Yes button to prompt the product to search for rmware updates. If the product detects an
upgrade, it will begin the update process.
NOTE: The LaserJet Update menu also contains items that allow you to set up automatic rmware updates
for the product, allow you to upload an earlier rmware version, and enable or disable a prompt prior to a
rmware le upload.
170 Chapter 2 Solve problems ENWW