Declaration of conformity
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturer's Name: Hewlett-Packard Information Technology R&D
(Shanghai) Co., Ltd.
DoC#: SHNGC-1400-00-rel.1.0
Manufacturer's Address: Building 6, No. 690 BiBo Road, ZhangJiang, Shanghai, China
declares, that the product
Product Name: HP LaserJet Pro M402n / HP LaserJet Pro M402d / HP LaserJet Pro M402dn
HP LaserJet Pro M403n / HP LaserJet Pro M403d
HP LaserJet Pro M403dn
Regulatory Model Number:
2)
SHNGC-1400-00
Product Options: All
Toner Cartridges: CF 226A / CF 226X
CF 228A/ CF 228X
conforms to the following Product Specications:
SAFETY: IEC 60950-1:2005 +A1:2009+A2:2013/ EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)
IEC 62479:2010 / EN 62479:2010
GB4943-2011
EMC:
CISPR 22:2008 / EN55022:2010 - Class B
1)
EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008
EN 55024:2010
FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 5
GB9254-2008, GB17625.1-2012
Energy Use: Regulation (EC) No. 1275/ 2008
EN50564:2011; IEC62301:2011
RoHS: EN 50581:2012
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC, the Ecodesign
Directive 2009/125/EC, the RoHS Directive 2011/65/EU and carries the CE-Marking accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1. The product was tested in a typical conguration with HP Personal Computer Systems.
2. For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or
the product number(s).
30 Chapter 3 Regulatory information ENWW
To Next Page
Loading...