NOTE: HP recommends creating a PIN to secure the destination folder.
NOTE: When a PIN is created, it must be entered on the printer control panel each time a scan is sent to
the network folder.
9. In the Scan Settings area, complete the following elds:
a. From the Scan File Type drop-down, select the default le format scanned les.
b. From the Scan Paper Size drop-down, select the default paper size for scanned les.
c. From the Scan Resolution drop-down, select the default scan resolution for scanned les.
NOTE: Higher resolution images have more dots per inch (dpi), so they show more detail. Lower
resolution images have fewer dots per inch and show less detail, but the le size is smaller.
d. In the Output Color drop-down, select whether scanned les will be in black and white or in color.
e. In the File Name Prex eld, enter a le name prex (e.g., MyScan).
10. Review all the information, and then click one of the following options:
●
Save and Test: Select this option to save the information and test the connection.
●
Save Only: Select this option to save the information without testing the connection.
●
Cancel: Select this option to quit the conguration without saving.
68 Chapter 6 Scan ENWW
To Next Page
Loading...