●
System Setup
●
Energy Settings
●
Shut Down After
3. Select the time for the Shut Down After delay.
NOTE: The default value is 4 hours.
Touchscreen control panels
1.
From the Home screen on the printer control panel, touch the Setup
button.
2. Open the following menus:
●
System Setup
●
Energy Settings
●
Shut Down After
3. Select the time for the Shut Down After delay.
NOTE: The default value is 4 hours.
Set the Delay Shut Down setting
Use the control panel menus to select whether or not the printer delays shutting down after the power
button is pressed.
NOTE: The steps vary according to the type of control panel.
2–line control panels
1. On the printer control panel, touch the OK button.
2. Open the following menus:
74 Chapter 5 Manage the product ENWW
To Next Page
Loading...