Top cover
Before proceeding, remove the following components:
●
Main-input tray. See Input tray assembly on page 36.
●
Output bin tray extension. See Output tray assembly on page 37.
●
Left cover. See Left cover on page 37.
●
Front cover. See Front cover assembly on page 38.
●
Right cover. See Right cover on page 40.
●
Cartridge door. See Cartridge door on page 48.
Remove the top cover
1. Remove two screws (callout 1).
CAUTION: The upper-cartridge door arms (callout 2) can become easily be dislodged from the lower
arms. Do not lose the upper-cartridge door arms while servicing the product.
Figure 1-69 Remove the top cover (1 of 2)
To Next Page
Loading...