Main motor
Before proceeding, remove the following components:
●
Input tray or main-input tray. See
Input tray or main-input tray on page 40.
●
Output bin tray extension. See
Output bin tray extension on page 41.
●
Front cover. See
Front cover on page 42.
●
Left cover. See
Left cover on page 43.
●
Right cover. See
Right cover on page 46.
Remove the main motor
1. Release one tab (callout 1), and then remove the holder (callout 2).
Figure 2-54 Remove the main motor (1 of 7)
1
2
72 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...