HP LaserJet - Page 29

NOTE
HP LEVEL III printers allow you to set the top margin either
programmatically
(as the LaserJet family printers do), or by
physically setting the paper
to the desired starting position (line
zero).
To keep your programming application compatible with
other HP LEVEL III printers, use the top margin escape sequence
only
at the beginning of the job.
TEXT LENGTH SELECTION
Text length is defined as the page length minus the top and
bottom margins. Since it is only possible to specify page length,
top margin, and text length, setting the text length specifies the
size of the bottom margin.
TOP MARGIN
E:c&J#E
TEXT LENGTH
Ec&J#F
BOTTOM- __ f
MARGIN - PAGE LENGTH
MINUS
(TEXT LENGTH+ TOP MARGIN)
Figure 2-4. Text Length and Bottom Margin
2-10