5) Use the Printer drop-down menu to select the printer you want to use as the proofing
printer, in our case the HP Latex 360.
• Select the created Quick Set in the HP Latex 300 printer.
• Set the Maximum Width and Height for the proof using the appropriate fields.
This does not set the actual width and height of your images. Instead, it sets a
limit on the size of the proof.
• Enable Proof All Pages if you want to print all the pages of a multi-page
document. Otherwise, only the first page will be printed.
• Select the Rendering Intent using the drop-down menu (Relative Colorimetric is
recommended when using the same media on both printers).
• Select which colors you want to exclude from the workflow by selecting them in
the Pure Hues.
• Click OK. You are now ready to proof.
6) In case you want to automate proofing job submission, you should enable “Create
proof Automatically" in the advanced quick set options of the HP Latex 3000 printer.
So, whenever a job is submitted to the HP Latex 3000, the proof job for the HP Latex
300 will be created automatically before printing.
LFP Customer Assurance 14 HP Restricted
To Next Page
Loading...
