Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, please see
Safety precautions on page 2
●
To move the carriage beam, select Printer tools > Move the carriage beam.
◦
Move up
◦
Move down
●
To move the printhead carriage, select Printer tools > Move the printhead carriage.
◦
Move to the service position
◦
Move to the leftmost position
◦
Move to the normal position
●
To move the drive roller, select Printer tools > Move the drive roller.
118 Chapter 8 Hardware maintenance ENWW
To Next Page
Loading...
