HP Latex 3000

2. Pay attention to the Internal Print Server and rearm the printer when requested, as usual.
CAUTION: In some maintenance procedures, the carriage beam is up when you turn on the printer, and the
carriage moves during initialization. Avoid putting any part of your body in the print area.
Summary of maintenance operations
Frequency Maintenance operation Cross-reference Part number and description
Daily Check and clean printheads (from
the Internal Print Server)
Check and clean the printheads
on page 81
Check the printer for dust and
aerosol
Check the print output areas for ink
droplets or condensation
Weekly Clean the print zone
Clean the print zone on page 125 HP Latex 3000 Printer Cleaning Kit,
provided with your printer
Clean the bottom of the carriage,
the drying glasses, and the line
sensor
Clean the bottom of the carriage,
the drying glasses, and the line
sensor on page 126
HP Latex 3000 Printer Cleaning Kit,
provided with your printer
Clean the pinchwheels and drive
roller
Clean the pinchwheels and drive
roller on page 130
Check and empty the condensation
collector bottle
Empty the condensation collector
bottle on page 92
100 liter
maintenance
(about once
every 2 months)
Clean the ink deposits
Clean the ink deposits on page 132
Clean the carraige rails and replace
the oiler foams
Clean the carriage rails and replace
the oiler foams on page 136
HP Latex 3000 Printer Cleaning Kit
and Carriage Rail Cleaning Tool,
provided with your printer
Check and empty the oil collector
caps and side trays
Empty the oil collector caps
on page 148
Replace e-cabinet fan filters
Replace the e-cabinet fan filters
on page 156
HP Latex 3000 Printer Cleaning Kit,
included in your printer
ENWW Summary of maintenance operations 121