Prepare to replace an e-cabinet fuse
1. Ensure that you have the E-cabinet PCA Fuses Kit (CZ056-67136), which is included in the Standard
Uptime Kit (D4J02A).
2. Check the Print Care error message log to find out which fuse needs to be replaced.
3. Turn off the printer in the correct way for maintenance operations: see
Turn the printer off on page 119.
Replace an e-cabinet fuse
1. Ensure that the printer is not printing.
2. Remove the screws shown below, then remove the rear right cover.
208 Chapter 8 Hardware maintenance ENWW
To Next Page
Loading...
