Queue Rules tab
●
Action when job fails
●
Action when job has been printed
●
Action when job is removed from the queue
Additional Settings tab
●
Maximum roll length
●
Gap between jobs
●
Nesting gap between images
●
Margins:
◦
RIP: Margins are set as defined in the RIP.
◦
Center: The image is horizontally centered on the loaded substrate.
◦
Default: The default margins are set to 5.0 mm (0.02 in). You can define the default left margin in
the Job Properties window.
18 Chapter 2 HP Internal Print Server ENWW
To Next Page
Loading...
