●
If the bands are about 4 cm apart, try adjusting tension and vacuum settings according to the table
below, step by step (a to c), until you find settings that work.
●
Check the printhead-to-ribs spacing in the Internal Print Server. If it is higher than normal, try reducing
it.
Color misalignment
Colors appear misaligned. Typically, lines and text are most affected by this issue.
It can happen in both axes: the substrate axis and the scan axis.
Color misalignment is most likely to be caused by printhead misalignment. To check printhead alignment,
print the printhead alignment diagnostics plot (see
Printhead alignment diagnostics plot on page 101).
If the problem comes from an automatic printhead alignment, you can try manual alignment for better
control of the alignment process.
240 Chapter 10 Troubleshoot print-quality issues ENWW
To Next Page
Loading...
