Rotate a print job
A job can be rotated by 90 degrees in either direction by using the rotation icons at the top right of the Job
Properties window.
NOTE: Rotation is available only when the printer is not printing.
The effect of rotation is shown in the preview. After you press the Save or Save As button in the Job
Properties window, the actual rotation of the job takes place. This could take a few minutes, depending on
the image size and resolution, during which the job can be neither printed nor edited, and the job status is
shown as Rotating. When it is done, the job is ready for printing.
Manage the print queue
The main screen of the Internal Print Server displays the queue of print jobs and various icons that can be
used to manage the queue.
64 Chapter 4 Create and manage print jobs ENWW
To Next Page
Loading...
