Safe mode
Under certain conditions, including printer operation outside of environmental specifications, and when a
used, refilled, or counterfeit ink cartridge has been detected, the printer will operate in ‘safe’ mode. HP is
unable to warrant the performance of the printing system when operated outside of environmental
specifications or when a used, refilled, or counterfeit ink cartridge is installed. Safe mode is designed to
protect the printer and the printheads from damage due to unexpected conditions, and is in operation when
the
icon is displayed on the printer’s computer. For optimal performance, use Original HP ink cartridges.
HP Latex printing systems, including Original HP inks and printheads, are designed and engineered together
to provide uncompromising print quality, consistency, performance, durability, and value—with every print.
Replace the printhead cleaning roll, filters, and spittoon
WARNING! This operation is limited to trained personnel only!
NOTE: During the installation of the printer, the designated personnel received training for safe operation
and maintenance of the printer. It is not allowed to use the printer without this training.
Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, please see
Safety precautions on page 2
When the cleaning roll reaches its end, it must be replaced, together with the aerosol filters, drying filters,
and left spittoon. All these parts are supplied together with the HP 881 Latex Cleaning Roll.
1. Printhead cleaning roll
2. Aerosol filters
3. Drying filters
4. Left spittoon
The Internal Print Server provides instructions for all replacements. Go to the Internal Print Server and select
Printer > Replace cleaner roll. A wizard appears summarizing all the operations to be done:
●
Replace the aerosol filters.
●
Replace the drying filters.
82 Chapter 5 Handle the ink system ENWW
To Next Page
Loading...
