122 Chapter 2 – Service mode EN
The following table shows the sequence of keystrokes used to change
the page count from a value of 000000 to a value of 0010480.
Note
Press the right side of MENU, ITEM, and VALUE to increase the value
(+). Press the left side of M
ENU, ITEM, and VALUE to decrease the
value (-).
Button press Display Description
M
ENU+
SERVICE MENU Enter the SERVICE MENU.
ITEM+
PAGES=0000000 *
Advance to the first item in the
SERVICE MENU.
SELECT
PAGES=0000000 *
Advance the cursor one digit to the
right.
SELECT
PAGES=0000000 *
Advance the cursor one digit to the
right.
VALUE+
PAGES=0010000 *
Increase the value of the third digit
by one.
SELECT
PAGES=0010000 *
Enter the change to the third digit,
and advance the cursor one digit
to the right.
SELECT
PAGES=0010000 *
Advance the cursor one digit to the
right.
VALUE+
(4 presses)
PAGES=0010400 *
Increase the value of the fifth digit
by four.
SELECT
PAGES=0010400 *
Enter the change to the fifth digit,
and advance the cursor one digit
to the right.
-VALUE
(2 presses)
PAGES=0010480 *
Decrease the value of the sixth
digit by two.
SELECT
(2 presses)
PAGES=0010480 *
Enter the change to the sixth digit,
and advance the cursor one digit
to the right causing the cursor to
wrap to the first digit.
GO
Exit.
To Next Page
Loading...