EN Paper specifications 151
5
Paper specifications
Paper specifications
Category Specification
Acid content 5.5 pH to 8.0 pH
Basis weight (1200 series):
Paper-input tray
Priority-input tray
75 g/m2 (20 lb)
75 g/m2 (20 lb)
Basis weight (2200 series):
Tray 1
Tray 2
Tray 3 (250-sheet feeder)
Tray 3 (500-sheet feeder)
Duplexer
60 to 163 g/m2 (16 to 43 lb)
60 to 105 g/m2 (16 to 28 lb)
60 to 105 g/m2 (16 to 28 lb)
60 to 105 g/m2 (16 to 28 lb)
60 to 105 g/m2 (16 to 28 lb)
Basis weight (3100 and
3150 series):
Paper-input bin
Single-sheet input slot
Document-feeder tray
60 to 105 g/m2 (16 to 28 lb) (up to 157 g/m2
[42 lb] using the front output slot)
60 to 105 g/m2 (16 to 28 lb) (up to 157 g/m2
[42 lb] using the front output slot)
44 to 105 g/m2 (12 to 28 lb) (up to 252 g/m2
[67 lbs] using the special-media lever)
Basis weight (3200 series):
Paper-input tray
Single-sheet input slot
75 g/m2 (20 lb)
75 g/m2 (20 lb)
Basis weight (4100 series):
Tray 1
Trays 2, 3, and 4
Duplexer
Optional envelope feeder
60 to 199 g/m2 (16 to 53 lb)
60 to 105 g/m2 (16 to 28 lb)
60 to 105 g/m2 (16 to 28 lb)
75 to 105 g/m2 (20 to 28 lb)
Caliper Dependent upon basis weight
Curl in ream Flat within 5 mm (0.2 in)
Condition of cut edge Cut with sharp blades with no visible fray
Fusing compatibility Must not scorch, melt, offset, or release
hazardous emissions when heated to
175° to 230° C (347° to 446° F) for 0.1 second
To Next Page
Loading...