HP LJ 1100 - Page 21

EN LaserJet 2200 Series printer control-panel light messages 19
1
Continuable attention error secondary codes
Control-panel light
pattern
Continuable
attention error
secondary message
Recommended
action
General continuable error l Verify that all of the
power-supply wire
harness connections
are connected
correctly and fully
seated.
l Replace the
formatter PCB.
l Replace the engine
controller.
Memory overflow/
memory full (20)
Status log code: 30016
l The printer memory
is full. Press G
O to
resume printing. If
you lose data, try to
free some printer
memory by
removing any
unnecessary fonts,
macros, or any other
data currently in the
printer memory. If
you continue to lose
data, you might
need to add more
printer memory. For
a temporary
solution, simplify the
image, or print at a
lower resolution.