HP LJ 1100 - Page 29

EN LaserJet 2200 Series printer control-panel light messages 27
1
Scanner error (52)
Status log code: 40052
l Press GO. The page
containing the error
will automatically be
reprinted.
l Turn the printer off
and reseat the laser/
scanner cables.
l Replace the laser/
scanner.
Bad beam detect error
(51)
Status log code: 40051
l Press GO. The page
containing the error
will automatically be
reprinted.
l Turn the printer off
and reseat the laser/
scanner cables.
l Replace the laser/
scanner.
Scan motor error (57)
Status log code:
40057
l Turn the power off
and back on.
l If the error persists,
turn the printer off,
reseat the
connection between
the laser/scanner
assembly and the
engine controller.
Turn the printer on.
l Replace the laser/
scanner.
l Replace the engine
controller.
Fatal error secondary codes (continued)
Control-panel light
pattern
Fatal error
secondary message
Recommended
action