EN Alphabetical messages 33
1
Alphabetical messages
The following control-panel messages are for the LJ 3100, LJ 3150,
LJ 3200, and LJ 4100 Series printers. Numerical messages begin on
page 67.
Enter a different one-touch button or an unassigned speed-dial code.
Ask the network administrator to unlock the function.
While programming a group-dial code, a fax number has been added
that is already in the group.
Add the next fax number to the group.
1 Ensure that the right-angle power cord that shipped with the printer
is being used.
2 Turn the printer off.
3 Remove and reinstall the duplexer.
4 Turn the printer on.
5 If the message persists, make sure that the duplexer is connected
and that the connector is not damaged.
6 Replace the duplexer.
(number) is a group, group not allowed
Access denied/menus locked
Already in group
Bad duplexer connection
To Next Page
Loading...