EN Alphabetical messages 43
1
1 Allow the product to retry sending the fax.
2 Call the recipient to ensure that the fax machine is on and ready.
3 Check that you are dialing the correct fax number.
4 Check that the Redial on no answer option is enabled.
5 Unplug the product telephone cord from the wall, plug in a
telephone, and try making a call.
6 Plug the product phone cord into a jack for another phone line.
7 If the error persists, replace the LIU.
1 Unplug the power cord from the power source, wait 10 seconds, and
then reconnect the power cord.
2 If you set up faxes to be sent at a future time or to be polled, print a
fax log to identify which faxes might have been lost. Then, reenter
the faxes.
3 Faxes that were received to memory (instead of printing) have been
lost. Ask the sender to resend the fax.
4 If the error persists, replace the formatter.
The product memory filled. Pages that fit into memory will be printed.
1 Print all of the faxes, and then have the sender resend the fax.
2 Cancel all fax jobs or clear the faxes from memory.
The product memory filled. Pages that fit into memory were sent.
1 Print all received faxes, or wait until all pending faxes are sent.
2 Cancel all fax jobs, or clear the faxes from memory.
Fax does not answer/Redial pending
Fax memory error # (number 1-5)
Fax memory full/Canceling receive
Fax memory full/Canceling send
To Next Page
Loading...