46 Chapter 1 – Control-panel messages EN
The product is running an internal cleaning cycle.
Wait for the product to finish the cleaning cycle. The message will clear
when the cycle is finished.
1st x = Device number in chain
2nd x = Device type (3 types):
1 = Input
2 = Output
3 = Stapler/stacker unit
yy = Device specific error
See the documentation that came with the paper-handling device.
The maximum number of fax numbers that can be added to an
ad hoc group is 100.
Resend the fax, but only to 100 or fewer fax numbers.
1 Install or reinsert the duplexer and ensure it is fully seated.
2 Ensure that the right-angle power cord is used for the printer.
Reseat or install a new toner cartridge.
In cleaning mode/Please wait 1 - 3 min.
Input device condition xx.yy
Input limit reached
Install duplexer
Install toner cartridge
To Next Page
Loading...