EN Alphabetical messages 51
1
The product attempted to execute “Reprint Last Fax” when nothing was
in memory.
Receive a fax before attempting to use this option.
1 Print all faxes that have been received in memory.
2 If you have several faxes set up to be sent at a future time or to be
polled, use job status to clear them.
There is a problem with the LIU.
1 Unplug the power cord from the power source, wait 10 seconds, and
then reconnect the power cord.
2 If the problem persists, replace the LIU.
3 If the problem persists, replace the formatter.
The fax log was unable to print because of an error, such as out-of-
paper.
Load media in the paper-input bin so the product can print the fax log.
No fax pages in memory to reprint
No memory for report, erase/print document
No modem installed
No room in fax log
To Next Page
Loading...