76 Chapter 1 – Control-panel messages EN
The DIMM that caused the error will not be used.
X = DIMM type
0 = ROM
1 = RAM
y = Device location
0 = Internal memory (ROM or RAM)
1 to 4 = DIMM slot 1, 2, 3, or 4
zz = Error number
0 = Unsupported memory
1 = Unrecognized memory
2 = Unsupported memory size
3 = Failed RAM test
4 = Exceeded maximum RAM size
5 = Exceeded maximum ROM size
6 = Invalid DIMM speed
7 = DIMM reporting information incorrectly
8 = DIMM RAM parity error
9 = ROM needs to be mapped to an unsupported address
10 = DIMM address conflict
11 = PDC XROM out of bounds
12 = Unable to make a temporary mapping
1 Turn the printer off, and then reseat or replace the specified DIMM.
2 Try the DIMM in another slot.
3 Replace the DIMM that caused the error.
53.xy.zz Printer memory error with an accessory
To Next Page
Loading...